56
SIDERACKS
It is possible to easily remove and clean the wire shelving placed in the wire grid and tray. You
can recover the wire shelving from screw channel by stretch down the edge of special plug,
like as shown. Then, you can recover with pull up to outward and lift up to from upper tabs.
Install after cleaning; process done in reverse order, rst the upper tabs set to boiler rack,
after that placed in a screw channel with stretching the special screw-earth channel wings.
(SeeFigure11)
Figure 11
SÜRGÜLÜ RAFLARIN KURULUMU
SÜRGÜLÜ RAFLARIN KURULUMU
SÜRGÜLÜ RAFLARIN KURULUMU
SÜRGÜLÜ RAFLARIN KURULUMU
SLIDINGSHELVESINSTALLATION