SilverOnyx 6QT - Before First Use

8
BEFORE FIRST USE
Before First Use
1. Remove all packaging materials and discard appropriately.
2. Clean all the parts by wiping with a soft damp cloth or sponge and dry
thoroughly.
3. Thoroughly clean the cooking pot in the dishwasher or with warm soapy
water. Rinse, dry, and place in the pressure cooker.
LID ASSEMBLY:
1. How to open the lid: Hold
the handle (1) rmly while
pushing down on the red
lid release button (22), turn
the lid (2) counter-clockwise
until it loosens and lift
vertically; the lid (2) can stand on the Lid Rest (20).
Note: For new units, the seal of the Lid (2) may be slightly stronger than
normal and may be slightly difcult to unlock. Once the Lid (2) has been
opened and closed several times, it will loosen up.
2. How to close the lid:
Observe the Rubber Seal
Ring (18) inside the Lid (2)
and ensure that it is tted
onto the lid all the way
around.
Caution: If the rubber seal ring is damaged, do not use the pressure cooker.
Contact Customer Service to repair or replace.
To lock Lid (2) in place, remove any food residue from rim of Upper Ring (9)
of cooking pot to ensure a proper seal. Take the Lid (2) off the Lid Rest (20),
hold the Handle (1) and close it downwards at the Opened Lid position. Turn
clockwise until you reach the Closed Lid position (a clamping sound can be
heard).
Note: To ensure you are properly closing the lid (2), line up the OPEN and
CLOSE markings on the Lid (2) and Main Body (13).