To Next PageTo Next Page
Need help?Do you have a question about the SilverStone AR12-RGB and is the answer not in the manual?
General| Type | Cooler |
|---|---|
| Bearing type | Hydraulic |
| Fan diameter | 120 mm |
| Maximum airflow | 68.9 cfm |
| Suitable location | Processor |
| Maximum air pressure | 2.7 mmH2O |
| Rotational speed (max) | 2200 RPM |
| Rotational speed (min) | 700 RPM |
| Noise level (low speed) | 9 dB |
| Noise level (high speed) | 29 dB |
| Compatible processor series | - |
| Supported processor sockets | LGA 1150 (Socket H3), LGA 1151 (Socket H4), LGA 1155 (Socket H2), LGA 1156 (Socket H), Socket AM2, Socket AM3, Socket AM4, Socket FM1, Socket FM2 |
| Mean time between failures (MTBF) | 40000 h |
| Pulse-width modulation (PWM) support | Yes |
| Fan connector | 4-pin |
| Fins material | Aluminum |
| Product color | Black, Stainless steel, White |
| Number of fans | 1 fan(s) |
| Illumination color | Multi |
| Number of heat pipes | 4 |
| Rated voltage | 12 V |
| Package type | Box |
| Harmonized System (HS) code | 84733080 |
Weight and Dimensions| Depth | 75 mm |
|---|---|
| Width | 128 mm |
| Height | 154 mm |
| Weight | 632 g |
| Heat pipes diameter | 6 mm |
| Fan dimensions (W x D x H) | 120 x 120 x 25 mm |
Details product defects covered under warranty, exclusions, and limitations.
Provides contact details for warranty service in North America, Australia, and other regions.
Instructions for applying thermal grease evenly on the CPU surface.
Guide to mounting LGA2011 and INTEL clips and tightening the nuts.
Instructions for removing the film from the cooler base and placing it on the CPU.
Steps to place the cooler onto the bracket and secure it.
Instructions for applying thermal grease evenly on the CPU surface.
Instructions for removing the film from the cooler base and placing it on the CPU.
Steps to place the cooler onto the bracket and secure it.
Confirm connector, definition, and direction of pin headers for cable connections.
