Need help?Do you have a question about the SilverStone Grandia 11 and is the answer not in the manual?
General| Type | HTPC Case |
|---|---|
| Color | Black |
| Motherboard Support | Mini-ITX |
| Front Ports | 2 x USB 3.0 |
| Dimensions | 440mm (W) |
| Drive Bays | 2 x 3.5", 2 x 2.5" |
Mounting screw for PSU, motherboard, and 3.5" HDD.
Mounting screw for 2.5" SSD.
Tool for installing motherboard standoffs.
Standoff for motherboard support.
Ties for organizing and managing cables.
Filters to prevent dust intake into the PC.
Cage for mounting a single 3.5" HDD.
Step 1: Detach and remove the top cover of the PC case.
Step 2: Disassemble and remove all drive brackets, cages, and beams.
Step 3: Detach and remove the front panel from the PC case.
Step 4: Mount and install the Power Supply Unit (PSU).
Step 5: Install I/O shield and connect motherboard cables.
Step 6: Install 3.5" and 2.5" storage drives into the case.
Step 7: Mount 240mm radiators with fans.
Step 8: Re-secure chassis beams and install 3.5" drives.
Step 9: Remove PCI slot cover and install graphics card.
Step 10: Secure the top cover to finish the PC assembly.
Limits CPU cooler height to 146mm, with variations based on bracket installation.
PSU depth limited to 180mm when a 120mm fan is installed on the right.
Supports graphics cards up to 340mm length and 151mm width.
120mm fan may interfere with motherboard USB headers in 7th PCIe slot.
Choose between ventilation, no ventilation, or dust filter installation.
Instructions for removing dust filters and cleaning the front filter.
Adjust PC power and HDD status LED brightness via a slide switch.
Covers production defects; excludes misuse, natural disasters, modifications.
Liability limited to market value; excludes consequential damages.
SilverStone will repair or replace defective products.
Requires original purchaser proof and contact for warranty.
To Next Page