Need help?Do you have a question about the SilverStone ICEGEM 240P and is the answer not in the manual?
General| Fan connector | 4-pin |
|---|---|
| Number of fans | 2 fan(s) |
| Radiator material | Aluminum |
| Water block material | Copper/Plastic |
| Type | All-in-one liquid cooler |
| Fan diameter | 120 mm |
| Pump connector | 3-pin |
| Fan speed (max) | 2200 RPM |
| Fan speed (min) | 600 RPM |
| Maximum airflow | 93.4 cfm |
| Pump motor speed | 3000 RPM |
| Suitable location | Processor |
| Fan noise level (max) | 36.6 dB |
| Fan noise level (min) | 7.3 dB |
| Pulse-width modulation (PWM) support | Yes |
| Pump current | 420 mA |
| Pump voltage | 12 V |
| Tube material | Rubber |
| Harmonized System (HS) code | 84733080 |
Weight and Dimensions| Tube length | 400 mm |
|---|---|
| Radiator depth | 274 mm |
| Radiator height | 38 mm |
| Waterblock width | 76 mm |
| Waterblock height | 66 mm |
| Fan dimensions (W x D x H) | 120 x 120 x 25 mm |
Guide for installing the cooler on Intel LGA 115x and LGA 1366 sockets.
Guide for installing the cooler on Intel LGA 2011 and LGA 2066 sockets.
Guide for installing the cooler on AMD AM4 and AM3 sockets.
Connecting the cooler for motherboard RGB synchronization.
Instructions for setting up the ARGB control box.
Overview of the ARGB controller's three buttons and their basic functions.
Details on the 10 available lighting effect modes for the ARGB controller.
How to adjust lighting speed (red indicator) and brightness (blue indicator).
Operation of the ARGB controller's demo mode (yellow indicator).
To Next Page