Need help?Do you have a question about the SilverStone SST-AP182 and is the answer not in the manual?
Detailed technical specifications of the SST-AP182 fan, including dimensions, airflow, and noise levels.
Ensures motherboard fan headers can provide sufficient current for the AP182 fan.
Details the 4-pin peripheral connector and recommends wire thickness for adapters.
Explains the limitations of 7V voltage connectors and their unsuitability for the AP182.
Describes resistance reducing connectors and their limitation to low current fans.
Explains that most third-party fan controllers may not support the AP182 due to high current draw.
Detailed technical specifications of the SST-AP182 fan, including dimensions, airflow, and noise levels.
Ensures motherboard fan headers can provide sufficient current for the AP182 fan.
Details the 4-pin peripheral connector and recommends wire thickness for adapters.
Explains the limitations of 7V voltage connectors and their unsuitability for the AP182.
Describes resistance reducing connectors and their limitation to low current fans.
Explains that most third-party fan controllers may not support the AP182 due to high current draw.
General| Model | SST-AP182 |
|---|---|
| Type | Case Fan |
| Fan Size | 180mm |
| Bearing Type | Fluid Dynamic Bearing |
| Rated Voltage | 12V |
| MTBF | 30, 000 hours |
| Dimensions | 180 x 180 x 32mm |
| Starting Voltage | 7V |
| Current | 0.30A |
To Next Page