SilverStone Sugo 14 User Manual

www.silverstonetek.com
SUGO 14
Small form factor cube chassis with high performance and cooling capabilities

SilverStone Sugo 14 Specifications

General

Case Type	Mini-ITX
Max GPU Length	330mm
Color	Black
Motherboard Support	Mini-ITX
Drive Bays	2 x 2.5"
Cooling System	1 x 120mm rear fan slot
Radiator Support	120mm front
Front Ports	2 x USB 3.0, 1 x Audio, 1 x Mic

Summary

Installation Guide

Remove Side Panels (Step 1)

Initial step to access the chassis interior by removing side panels.

Install Power Supply Unit (Step 2)

Installing the power supply unit into the chassis.

Install Motherboard I/O Shield (Step 5-1)

Install Motherboard and Secure Screws (Step 5-2)

Mounting the motherboard and securing it with screws.

Install 2.5" Hard Drive (Step 6-3)

Install Two HDDs (Step 8-1)

Install 240mm Radiator (Step 8-2)

Install Graphics Card (PCI Slot & Holder) (Step 10-1)

Installing the graphics card, including slot cover and holder.

Install Graphics Card (Secure Card & Holder) (Step 10-2)

Securing the graphics card and its holder in place.

Component Restrictions

Cooler Height Limits

Maximum allowable CPU cooler height restrictions.

140mm Fan/Radiator Clearance

Clearance limits for installing 140mm fans and radiators.

120mm Fan/Radiator Clearance

Clearance limits for installing 120mm fans and radiators.

3.5" HDD Installation Clearance

Clearance limits for installing 3.5" HDDs.

PSU Depth Limitation

Maximum depth allowed for the Power Supply Unit.

Graphics Card Size Limitations

Maximum length and width specifications for graphics cards.

Graphics Card PCB Thickness Limits

Recommended Cooling Configuration

CPU Liquid Cooler & Air GPU Fan Setup

Warranty Terms & Conditions

General Warranty Terms and Conditions

Detailed overview of product warranty coverage and limitations.