Need help?Do you have a question about the Sim-Lab P1-X PRO COCKPIT and is the answer not in the manual?
Provides initial guidance, tool requirements, and parts check before assembly begins.
Lists the essential tools required for the assembly process.
Demonstrates the technique for inserting slot-nuts into aluminum profiles.
Connects the primary 1350mm and 500mm profiles using bolts and washers.
Attaches corner brackets and 490mm profiles to strengthen the main frame.
Installs end-caps and slot-nuts onto the assembled frame profiles.
Assembles the foot support plates with feet, nuts, and washers.
Mounts the assembled feet onto the main cockpit base frame.
Attaches the pedal brackets to the 470mm profiles for the pedal deck.
Assembles the main structure of the pedal deck.
Assembles the left side upright structure using sandwich plates.
Attaches the assembled uprights to the main cockpit frame.
Attaches the wheel deck to the main cockpit structure.
Assembles front mount brackets and spacers for optional wheel mounts.
Details assembly for the optional Fanatec Direct Drive mount.
Attaches the side mount bracket to the cockpit frame.
Installs the side mount sandwich plate for accessory mounting.
Visual guide showing compatibility with various steering wheel brands.
Provides contact details for customer support via email and Discord.
Offers recommendations for printing the manual efficiently and environmentally.
General| Type | Racing Simulator Cockpit |
|---|---|
| Color | Black |
| Adjustability | Fully adjustable |
| Material | Aluminum |
| Compatibility | Compatible with most racing wheels and pedals |
| Dimensions | Varies depending on configuration |
| Additional Features | Optional accessories available, integrated cable management |
To Next Page
