Sima SL-10L - User Manual

To replace the batteries:
1. Make sure that the power
switch is in the OFF position.
2. Press in on both sides of the
SL-10L case as illustrated by
the two arrows in Fig. C to
release the internal tabs. The
tab can be seen in Fig. D.
3. Pull the case apart gently.
Note: The case is still joined
at the bottom.
4. To separate the bottom, work
the case back and forth until
it is freed from the shoe
mount.
5. Replace the batteries.
6. Snap the case back together.
Fig. C
Fig. D
90 Day Limited Warranty
Sima Products warrants this product against
defects in materials and workmanship for a period
of 90 days from the date of retail purchase. During
the warranty period, the product will be repaired or
replaced, at Sima’s option. You can register your
product online at www.simacorp.com
Conditions
Ship your unit, freight pre-paid, including
reasonable proof of date and place of purchase
and description of problem to:
Attn: Customer Service
c/o Sima Products
Bldg. #5
140 Pennsylvania Ave.
Oakmont, PA 15139
This warranty is void if any defects are caused by abuse,
misuse, negligence or unauthorized repairs. All liability for
incidental or consequential damages is specifically
excluded. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you. This
warranty gives you specific legal right and you may also
have other rights which vary from state to state.
LED
Video Light for Digital
Cameras & Camcorders
Powerful White LED Technology
Model SL-10L
Register online at www.simacorp.com

Summary

Battery Replacement

Instructions for Battery Removal

Detailed steps on how to open the SL-10L case and replace batteries, referencing figures.

Warranty and Product Information

90-Day Limited Warranty

Covers product defects, repair/replacement options, and online registration.

Product Specifications and Registration

Highlights LED technology, model SL-10L, and online registration details.

Product Introduction and Mounting

Product Mounting Options

Explains how to mount the SL-10L on camcorder accessory shoes or via a bracket.

Battery Usage and Charging

Initial Battery Charging

Details the included rechargeable AAA NiMH batteries and initial charging requirements.

Battery Charging Procedure

Instructions for charging batteries via AC adapter, including indicators and duration.

Operation and Special Notes

Operating the Light

Instructions on how to turn the light on/off using the switch.

Using Non-Rechargeable Batteries

Warns against charging alkaline batteries and using them with the AC charger.

Product Specifications

Technical Specifications

Lists key specifications including LED color, power, run time, battery type, charger, weight, and size.

Sima SL-10L Specifications

Battery

battery type	600 mA hour NiMH
battery capacity	600 mA hour
run time	60 to 90 minutes

Power

charger input voltage	120V AC
charger output voltage	3V DC
power	2 AAA NiMH batteries

LED Specifications

color temperature	~6000K
LEDs	~6000K Color Balanced

Weight and Dimensions

weight	1.9 oz
size	2.35” x 1.5” x 1”