What to do if my Simco-Ion Blower fan unit does not operate?
If the Simco-Ion Blower fan unit isn't working, start by inspecting the power cords and connections to ensure they are properly connected. Also, examine the fan guards for any obstructions that may be preventing the fan from spinning.
Why decay times are too long for Simco-Ion Aerostat XC2?
If the decay times for your Simco-Ion Blower are too long, it might be due to dirty emitter points. Try cleaning the emitter points to resolve this issue.
What to do if the fault alarm blinks intermittently on Simco-Ion Aerostat XC2?
If the fault alarm on your Simco-Ion Blower is blinking intermittently, the emitter points may be dirty. Cleaning them might solve the problem.
How to fix offset balance if it is more than 10V on Simco-Ion Blower?
If the offset balance is greater than 10V on your Simco-Ion Blower, the emitter points may be dirty. Cleaning the emitter points should help.
General| Ionization Method | Steady-state DC |
|---|---|
| Frequency | 50/60 Hz |
| Type | Blower |
| Input Voltage | 120 VAC |
| Airflow | Adjustable |
| Air Velocity | Adjustable |
| Noise Level | 52 dB(A) |
Outlines the static discharge times, balance specifications, and coverage area performance of the Aerostat XC2.
Guides on how to properly mount and position the Aerostat XC2 for optimal performance and safety.
Provides instructions on how to safely connect the Aerostat XC2 to a power source, including grounding.
Details the FAN and FAULT LED alarms, their causes, and how to interpret them for troubleshooting.
Instructions for inspecting and cleaning the emitter cartridge, including removal and replacement procedures.
Provides a table of common problems, possible causes, and solutions for the Aerostat XC2, including fuse replacement.
To Next Page
