Simco-Ion FMX-004 - Power and Range; Accuracy and Display; Analog Out and Buzzer

34
4 Technical specifications
Power supply: 9 V DC alkaline battery, ICE code 6LR61
(30 hours life time)
Measuring range: AUTO mode 0 - ±1,49 kV, LO range
±1 - ±30 kV, HI range
HI range mode 0 - ±30 kV
LO range mode 0 - ±3 kV
Hysteresis range ±1 - ±1,5 kV
Ion balance 0 - ±300 V
Measuring distance 25 mm ±0,5 mm (between FMX and object to be measured)
Response time: <1 second
Accuracy: ±10%
Polarity: Positive and negative
Measuring frequency: 5 times per second
Graphical display: Red
Blue
positive polarity
negative polarity
Precision ±0,1 kV AUTO LO range
±2,0 kV AUTO HI range
±0,2 kV LO range
±2,0 kV HI range
±20 V ion balance
Numeric display:
. → 0 - ±1,49 kV
. → ±1 - ±30 kV
AUTO LO range
AUTO HI range
. → 0 - ±3,00 kV
LO range
. → 0 - ±30 kV
HI range
 → 0 - ±300 V
Ion balance
Automatic power off: Power is turned off automatically if the unit is left on for five
minutes. For continuous operation the red [POWER] button
should be pressed more than three seconds when power is
turned on
Analog out: Response speed 40 ms
Output voltage AUTO ±3 V (2 kV = 0,2 V)
HI ±3 V (1 kV = 0,1 V)
LO ±3 V (2 kV = 2 V)
Ion balance ±3 V (200 V = 2 V)
Buzzer: Beep sound will be heard during the following actions:
- Power on: one beep
- Power on with Auto Off feature disabled: (Depress
[POWER] button for more than 3 seconds) three beeps
- Auto power-off: short beeps at 1 second interval for 5
seconds before power off
- Over range: Continuous sound
Operating temperature: 10 - 40 °C
Relative humidity: 0 - 60% RH (non-condensing)
Housing: Conductive plastic (ABS)
Size: 123 mm (L) x 73 mm (W) x 25 mm (H)
Weight: 170g
Optional: Analog out cable 1,8 m and mounting bracket set
The measuring accuracy is not affected by air ionization.