to operate in windows for USB loading. Without a USB driver, it will be identified as an
unknown device.
Question:Does the Raspberry Pi control occupy pins?
Answer:
Not occupied by default.
Question:Why does the Raspberry Pi fail to load when running sudo ./install?
Answer:
Make sure that your system kernel is above 5.4. Do not use sudo update to upgrade the
Raspberry Pi to the latest version, otherwise, the kernel version will be upgraded to a version
higher than the current firmware and it will not be recognized.
Question:Can I use multiple 5G modules at the same time?
Answer:
Yes, connect to different USB ports of different hosts, take Raspberry Pi as an example, and
the instructions for dialing up the Internet at the same time are as follows:
sudo ./simcom-cm -i wwan0
sudo ./simcom-cm -i wwan1
To Next Page
Loading...