EasyManua.ls Logo

SimCom SIM7020E - Interface Introduction

SimCom SIM7020E
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Simplify Communication
SIM7020 Series_SUB KIT_User Guide Page 5 / 13
In order to get proper part to do the evaluation test, here is brief list for SIM7020x-SUBKIT part
numbers.
Kit type Part Number Comments
SIM7020C-SUBKIT S2-10886 For China
SIM7020E-SUBKIT S2-107ZG For Europe, Australia and South Asia etc.
SIM7020G-SUBKIT S2-1088A For Global
2.2 Interface Introduction
From above overview on the SIM7020x-SUB, we can see many signal interfaces, communication
ports and antenna interface. Now, we will describe them in detail.
Index Position Description
A
Uxxx SIM7020x Module
B
SW101 PWRKEY Button
C
J205 SIM Card holder
D
J204 1.
UART ports of SIM7020x, for AT communication and FW update.
2. Power Supply
E
SW201 Power Switch (UP is ON, POWER red LED201 light)
F
J208 USB port of SIM7020x, for debugging
G
J101 LTE antenna SMA connector
H
J209 Reset and GND reserve locations, for resetting the module
I
J203(Pin7,Pin9) DTR and VDD_EXT reserve locations, for sleep mode (AT+CSCLK=1),
( J203 square hole is pin 1)
J
J203(Pin4,Pin6) RTC_EINT and GND reserve locations, for waking up module from
the PSM mode, ( J203 square hole is 1 pin)
K
J210 VBAT test point
SIMCom Confidential File

Other manuals for SimCom SIM7020E

Related product manuals