6. Inquiry the cumulative amount of gas and water
In working statement, @ buttons can inquire about the cumulative water consumption and gas
consumption. Click the @ key to query cumulative amount of using water information, press @
key again can be inquired accumulated gas consumption information. Press the third time for the
@ button or no operation for 20s, can exit the inquiry function.
Note:
•
Real‐time gas consumption show the basic unit of m³/h
•
Real‐time hot water production show the basic unit of L/min
•
Cumulative amount of using water and gas consumption show the basic unit of m³, When the
display numbers reach 999m³,water record is automatically cleared. For example, when the
query information display "Water production 180m³", represents a total cumulative amount of
water heater 180m³. When real‐time gas consumption information shows "volume 8.3m³", it
indicates the water heater cumulative total gas consumption 8.3m³.
•
Cumulative gas consumption and cumulative amount of water is automatically cleared after
power failure
•
The contents of the query function display only for reference, can not be used for
measurement.
To Next Page
Loading...
Need help?
General
