Sime MINI 16 BF ErP

To Next Page

To Previous Page

Mini 16 BF ErP

Technical instruction

Step 1

Open front cover

1.Screw off the front panel and disconnect the display and control unit terminal.

Step 2

Replace gas

1.Screw off the gas tube assembly

①

and take it out

②

tube assembly

2.Change to the matched gas ejector tube assembly.

(pic 1)

Note: It's necessary to examine the air tightness after change, to check the seal

ring on the gas control system installed well to prevent gas leakage.

Sime MINI 16 BF ErP - Page 28