Need help?Do you have a question about the Sime SHP M PRO 016 and is the answer not in the manual?
Explains the severity and implications of Danger, Warning, and Caution safety classifications.
Covers safety precautions and a general overview of field wiring procedures.
Details requirements for selecting wire diameters and safety devices like circuit breakers.
Details wiring for additional heat sources (AHS) and 3-way valves (SV1, SV2, SV3).
Covers wiring for tank booster heaters, backup heaters, and room thermostats.
Procedures for initial start-up, especially in cold climates, and pre-operation checks.
General safety guidelines and precautions for unit installation.
Detailed steps for installing the wired remote controller, including wiring and covers.
Steps for final checks and manual test runs of unit functions like pumps and modes.
Emphasizes electrical safety precautions and the need for professional maintenance.
Initial steps and general advice for diagnosing and correcting unit issues.
Addresses issues like no heating/cooling, compressor not starting, pump noise, and pressure relief valve problems.
Covers problems with heating capacity shortage and difficulties changing between Heat and DHW modes.
A comprehensive list of error codes, their display numbers, and associated malfunctions.
Covers repairing sealed and intrinsically safe components, plus leak detection methods.
Explains refrigerant removal, charging procedures, decommissioning, and labelling.
To Next Page
General
