24
Picture 1
Picture 2
Picture 3
• Place your appliance as shown in Figure 2. Then, mount two cas-
tors with brakes in the to the back side of the container, by xing the
castors in the sockets under the container and ensure that the sock-
et centers are aligned, as shown in gure 4. Then place the U-pins
through the holes. Ensure the stability by placing the pim wedges.
•By placing the container as shown in gure 3, mount the two castors
in the castor box as shown in gure 5, by applying the same procedure.
Picture 4
Picture 5
Picture 5
Climate Class Description
Your cooler provides best cooling performance in the conditions
specied below as per the climate class. Thus, ensure that the environ-
ment where your cooler shall be used conforms with this temperature
ranges.
To Next Page
Loading...
