29
DEFROSTING OPERATION
High temperatures and humidity and frequent operation of your
appliance may increase the rate of frost. The more the frost, the
more the operation time. And this causes an increase in the power
consumption. Turn o your appliance and make sure that the frost is
removed in such a case.
You can scrape ice and snow with the ice-scrabble that comes with
your appliance. If the ice layer is too thick to scrape, put the products
in the cooler in a secure place to avoid decaying. Then unplug the
cooler. Leave the windows open for 3-4 hours. Remove the dissolved
ice with scrabble. After it is completely cleaned, put the glasses on
again and plug it. After running for 3 hours, put your frozen products
inside.
To Next Page
Loading...
