Simmons Kids SlumberTime 303030 User Manual

Instrucciones de Ensamble
de su Cómoda
Directives de Montage pour votre
Commode
Assembly Instructions for your
Dresser
Note: The style of your item may vary from what is pictured in the instruction sheet.
Remarque : Le modèle de votre article peut être différent de celui qui est illustré dans le feuillet d’instructions.
Note: El estilo de su artículo puede variar de la ilustración en la hoja de instrucciones.
©2013 Simmons Juvenile Furniture, A Division of Children's Products, LLC
Simmons Juvenile Furniture
A Division Of Children's Products, LLC
114 West 26th Street
New York, NY 10001
1-800-218-2741
23782- May 8, 2013-R0
Lea todas las instrucciones antes de ensamblar y usar. MANTENGA LAS INSTRUCCIONES PARA SU USO FUTURO.
Read all instructions before assembly and use. KEEP INSTRUCTIONS FOR FUTURE USE.
ADULT ASSEMBLY REQUIRED Due to the presence of small parts during assembly, keep out of reach of children until assembly is complete.
DEBE SER ENSAMBLADO POR UN ADULTO Debido a la presencia de piezas pequeñas durante el ensamblaje, mantenga fuera del alcance de los niños hasta que complete el ensamblaje.
Style #:
Lot:
Date:
___________ ___________ ___________
Children's Products LLC is an authorized licensee of Dreamwell, Ltd. a wholly-owned subsidiary of Simmons Bedding Company. SIMMONS KIDS® and the SIMMONS S&GLOBE are registered trademarks of Dream- well, Ltd. ©2011 Dreamwell, Ltd. All rights reserved.
Trademark is a registered trademark of Delta Enterprise Corp., New York, NY.
Lisez toutes les instructions avant l’assemblage et l’utilisation. CONSERVEZ LES INSTRUCTIONS POUR RÉFÉRENCE ULTÉRIEURE.
L’ASSEMBLAGE DOIT ETRE FAIT PAR UN ADULTE A cause de la présence de petites piéces, pendant l’assemblage gardez hors de portée des enfants jusqu'à ce que celui-ci soit terminé.
When contacting Simmons Consumer Care please reference the below information. Before contacting Simmons Consumer Care please ensure that the information below matches the information found on the label on the back panel, please reference the information found on the product when contacting Simmons Consumer Care. Lorsque vous contactez le Service client de Simmons, veuillez faire référence aux informations ci-dessous. Avant de contacter le Service client de Simmons, veuillez vous assurer que les informations ci-dessous correspondent aux informations indiquées sur l’étiquette qui se trouve sur le panneau arrière; veuillez faire
référence aux informations indiquées sur le produit lorsque vous contactez le Service client de Simmons. Al contactar al servicio al cliente de Simmons, entregue la información abajo. Antes de contactar al servicio de atención al cliente de Simmons, asegúrese de que la información abajo calza con la que aparece en la etiqueta en el panel trasero; al contactar al centro de atención al cliente de Simmons, mencione la información que aparece en el producto.
Distributed in Canada by
Distribué au Canada près
Little Folks
A Division of Children’s Products, LLC
Care of/Soins de:
501 Franklin Boulevard
Cambridge, Ontario N1R8G9

Simmons Kids SlumberTime 303030 Specifications

General

Material	Wood
Brand	Simmons Kids
Model	SlumberTime 303030
Type	Crib
Convertible	Yes
Safety certifications	JPMA certified
Product Type	Convertible Crib
Color	Espresso
Weight Limit	50 lbs (crib), 50 lbs (toddler bed)
Features	Converts to toddler bed, daybed and full-size bed
Adjustable Mattress Height	Yes, 3-position adjustable mattress height

Summary

Assembly Instructions for Dresser

Adult Assembly Required

Assembly requires an adult due to small parts.

General Safety Warnings

Tip-Over Prevention

Advice to prevent furniture tip-over and related serious injuries.

Product Information

Assembly Notes

Verify parts and use a soft surface for assembly to prevent damage.

Care and Maintenance

Guidelines for cleaning, protecting, and maintaining the furniture's finish.

Parts Identification

Dresser Components

Identification of the main structural parts of the dresser.

Hardware Kit Components

List and identification of all screws, bolts, dowels, and other hardware.

Pre-Assembly Review

Bolt Tightening Procedure

Instructions on how to properly install and tighten bolts during assembly.

Dresser Assembly

Assemble Main Frame Structure

Connect side rails, center panel, and top panel to form the dresser frame.

Attach Back Panel

Secure the back panel to the assembled dresser frame using screws.

Drawer Assembly

Assemble Drawer Components

Attach drawer sides to the drawer front for both left and right drawers.

Complete Drawer Assembly

Insert drawer bottom and back, completing the right drawer assembly.

Finalize Drawer Assembly

Insert drawer bottom and back, completing the left drawer assembly.

Drawer Installation and Operation

Drawer Glide Operation

Instructions for releasing drawer guide sections and operating glide levers.

Attach Drawer Guides to Drawers

Fasten outer drawer guide pieces to the assembled drawer sides.

Install Drawers into Case

Align drawer runners with case guides and push drawers straight in until they click.

Drawer Finishing

Attach Drawer Knobs

Assemble and attach the knobs to the front of each drawer.