7
Customer Service: (646) 435-8726 www.DeltaChildren.com
MATTRESS BOARD ASSEMBLY
M5 Screw – 1.7cm – 4x – Actual Size
Top View of Bassinet Frame
Close up View
of the Mattress
Support Nuts
Locate the mattress support board, four (x4) M5 X 1.7cm
screws, and a Phillips screwdriver (not included).
Align the four holes of the mattress support board
onto the plastic mattress board support nuts.
2
3
Using a Phillips screwdriver and four (x4) M5 X
1.7cm screws, tighten the mattress board onto
the plastic mattress board support nuts.
Mattress Support Board Fully
Attached to Bassinet Frame
To Next Page
Loading...
