SRP9170/80 P25 Portable Radio – User Manual
© ComGroup Australia 2010 Page 21 TNM-U-E-0091 1.4a
4.2.4.1 Making an Individual Call
In Phonebook mode, when the “PTT” key is pressed:
The radio is changed to individual call mode (individual call to the unit identifier of the
selected phone entry). The individual call icon is displayed.
If the radio is already in individual call mode addressed to a different unit, the
destination unit ID is replaced by that of the newly selected phone entry.
The radio will remain in individual call mode until the inactivity timeout has elapsed,
ie. No PTT or signal received for the Field Programmer set time period (typically 10
seconds).
The radio will return to the default channel screen.
4.2.4.2 Making an Individual Call with Call Alert
When the “OK” key is pressed with the Phone Book entry displayed:
A Call Alert is sent to the displayed ID.
The called radio will sound a Call Alert.