EasyManuals Logo
Home>Simoco>Portable Radio>P25

Simoco P25 User Manual

Simoco P25
63 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #54 background imageLoading...
Page #54 background image
SRP9170/80 P25 Portable Radio – User Manual
© ComGroup Australia 2010 Page 54 TNM-U-E-0091 1.4a
Note that if Autoscan is programmed for that channel, the Scan key will not function.
6.13 SCAN EDIT
This key is used to enter the Scan Edit menu, where the members of a scan group can be
added or deleted.
6.14 SCRAMBLER (P25 ANALOGUE)
This function enables transmitted voice to be scrambled, to prevent radios without a
scrambler from listening in on the conversation.
This low security form of encryption is sufficient to make speech unintelligible to other casual
listeners, however it does not offer high level security as other radios programmed with a
scrambler function will be able to unscramble it.
Supported in analogue mode only.
The speaker sounds a ‘bip-bip’ tone when PTT is pressed to indicate that scrambler is active.
Scrambler On/Off state is reset to Off at power-up and channel change.
First press of the function key enables scrambler mode.
The 2
nd
press restores channel to normal (clear) mode.
6.15 SKIP
The Skip function key is used to temporarily remove members from a scan channel. The
removal is temporary only until the channel is changed.
6.16 SQUELCH
The squelch mode is used to selectively receive P25 signals. It has three modes, Monitor,
Normal and Selective. When set to Monitor, all P25 traffic on that channel will be heard,
subject to presence of encryption. Normal mode will hear all P25 traffic with the correct NAC
code. Selective mode will only receive calls to the channel default talkgroup and individual
calls.
6.17 TALKAROUND
On a repeater channel only, this function key allows the radio to transmit on the base
station’s output channel, so the user can talk directly to other mobiles on the channel, while
the repeater is out of service or out of range.
When the key is pressed again (or the Channel is changed) the mobile’s transmitter channel
reverts to its normal setting.
Talkaround mode is indicating to the user by a double beep at the start of each PTT.
6.18 ZONE
This function provides a shortcut to the detailed zone menu.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Simoco P25 and is the answer not in the manual?

Simoco P25 Specifications

General IconGeneral
BrandSimoco
ModelP25
CategoryPortable Radio
LanguageEnglish

Related product manuals