SRP9170/80 P25 Portable Radio – User Manual
© ComGroup Australia 2010 Page 38 TNM-U-E-0091 1.4a
A “Reset” function key press (if configured), takes the radio back to the default screen
display.
A “Back” or “M” keypress returns to the Message Reply Pop-up screen.
When “OK” key is pressed, the selected short message is sent in reply to the received
message, and the radio returns to the default screen.
4.2.15.7 Text Message Reply Screen
This menu is used to reply with a free form text message.
The maximum length of text message is 210 characters. The number of characters entered
is displayed in the top right hand side.
The characters are entered via the keypad by pressing the relevant key one or more times to
choose each character.
The ▼ key is used to move the curser to the left.
The ▲ key is used to move the curser to the right.
A “Reset” key press and hold for less than one second deletes the character to the left of the
cursor, and moves the curser position to the left by one.
Holding the “Reset” key down for more than one second deletes all characters from the
curser position to the right. A new character entered is put on the current cursor location.
The ‘#’ key is used to toggle upper and lower case.
The “0” key is the space key.
When “Back” key “M” is pressed, the radio returns to the Message Reply pop-up screen.
Pressing “OK” sends the edited text message in reply to the sender of the message. The
radio returns to the default screen.
To Next Page
Loading...
Need help?
General
