SRP9170/80 P25 Portable Radio – User Manual
© ComGroup Australia 2010 Page 40 TNM-U-E-0091 1.4a
4.2.15.9 Text Message Screen
This screen allows editing and sending a free form text message. A text message can have
a maximum length of 210 characters. The number of characters entered is displayed in the
top right hand side.
The characters are entered via the keypad by pressing the relevant key one or more times to
choose each character.
The ▼ key is used to move the curser to the left.
The ▲ key is used to move the curser to the right.
A “Reset” key press and hold for less than one second deletes the character to the left of the
cursor, and moves the curser position to the left by one.
Holding the “Reset” key down for more than one second deletes all characters from the
curser position to the right. A new character entered is put on the current cursor location.
The ‘#’ key is used to toggle upper and lower case.
When “Back” key “M” is pressed, the radio returns to the Message Reply pop-up screen.
When “OK” key is pressed, the Destination Selection Pop-up Menu screen appears.
4.2.15.10 Destination Select Pop-Up Menu
This menu allows selection of the message destination.
The selections are:
PHBK: to select the destination from the phone book.
ENT.ID: enter the destination unit ID.
CANCEL: to cancel the destination selection.
Use the ▼ and ▲ keys to make the selection.
To Next Page
Loading...
Need help?
General
