8
HOME CONTROL
IIf any of the HOME CONTROL buttons are pressed and a
sensor or module is not associated (programmed) with this
feature the Control Panel will say,
Function not available
.
CHIME Doors. Press to cause the Control Panel to beep
when protected doors or windows are opened.
This is a nice feature to use if you’re busy in one part of
your home and you want to know when family members
are going in and out of your home.
CHIME Special Motion. Press to cause the Control
Panel to beep when Motion Sensors detect movement within
a specific area. These Motion Sensors are not used for intru-
sion protection.
If you have Motion Sensors located in areas such as in a
patio area or at the front door and you want to know when
someone is approaching these areas, you would use this
feature.
LIGHTS Time Activated. Press to enable system con-
trolled lights to turn on and off at scheduled times.
An example is turning your living room lights on at 7 pm
and off at 10 pm.
LIGHTS Sensor Activated. Press to have specially
programmed sensors turn on lights for 4 minutes when sen-
sors are tripped.
An example is using an outdoor Motion Sensor at the front
door. When the Motion Sensor detects movement it will
cause the light at the front door to turn on.
You may also program the star button on the KeyChain
Touchpad to turn on a light for 4 minutes. The KeyChain
Touchpad star key will always work, even when sensor
activated lights are disabled.
EMERGENCY
Press EMERGENCY for 2 seconds or twice quickly to call the
central monitoring station and notify them of a non-medical
call for help.
EMERGENCY
Sensors Motion
9 -
0
Test Weekly
STATUS
SYSTEM
DISARM
7 - 8
5 - 6
Sensor
Activated
LIGHTS
LIGHTS
Time
Activated
Motion
Windows
ARM
Doors &
ARM
3 - 4
1 - 2
CODE
Doors
Special
CHIME
CONTROL
CHIME
SECURITY
HOME HOME
8988G12B.DS4
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...