All models are fitted with a hot water
mixer that can be used to adjust the delivery tem-
perature of the water and therefore, to optimise
system performance.
To adjust the hot water economiser, it is necessary
to remove the top panel of the machine, proceeding
as follows:
• unscrew the 4 screws on the top panel (Fig. 22);
• to adjust the temperature of the hot water deliv
-
ered from the nozzle, turn the register knob
CLOCKWISE / ANTICLOCKWISE to INCREASE
/ REDUCE the temperature;
• at the end of this operation, refit the top panel on
the machine.
To Next Page
Loading...
