Page 15
COMPONENTS AND TOOLS ON REQUEST
To have the possibility to customize the engine and then adapt it to different needs and
methods of use, SIMONINI offers a range of components on request:
PULEGGIA MOTRICE
PINION
In four different diameters (44/48/53/55/56) as well as providing the proper reduction
ratio, can be used to soften or make more rapid rise in engine speed or to move,
maintaining the propeller revolutions, any points of the torque curve that does not meet
your needs at a specified "range" of use, as when cruising.
Cod: SIM250/51 mm. 44
Cod: SIM250/51 mm. 48
Cod: SIM250/51 mm. 53
Cod: SIM250/51 mm. 55
Cod: SIM250/51 mm. 56
PROPELLERS
For this engine we recommend a carbon fiber propeller developed in collaboration with
the Helix company:
H 30 F 1,25m L-M-09-2 suitable for reduction 1:268
H 30 F 1,30m L-M-08 -2 suitable for reduction 1:248
H 30 F 1,30m L-M-10 -2 suitable for reduction 1:268
H 30 F 1,40m L-EZ-07 -2/A6 suitable for reduction 1:268
To Next Page
Loading...
Need help?
General
