Page 6
The MINI 2 PLUS engine must be fitted to the frame using its four elastic supports
"silent blocks", radial mounted: two are positioned on the head and two on the blue
ergal plate.
During the installation, some safety precautions must be made: remember that an
engine generates vibrations, even if very few, which can cause the loosening and/or
removal of screws or any other object. Therefore, to prevent any engine
components may cause damage to persons and/or property, make sure the engine
through a small steel cable. Components normally "made safe" are:
• The filter and the carburetor to the engine
• The springs and exhaust to the engine
• The engine itself to the frame, bypassing the silent blocks. In this case we will use
the "webbing" of synthetic fiber is particularly resistant to traction and tearing.
The spherical mouth of the muffler should be lubricated with grease resistant to
high temperatures (e.g. copper grease) before being implanted in the exhaust
manifold.
We recommend taking maximum care when carrying out these operations: in any
case, during the assembly phase the proper choices must be made by expert and
qualified personnel.
To Next Page
Loading...
Need help?
General
