Simons Voss Technologies RouterNode 2 - Page 46

Make a distinction between them:
 Reset system configuration: Reset all system
settings (3060 or SmartIntego or MobileKey).
 Reset network configuration: Reset all network
settings (IP address, DHCP settings, host name).
NOTE
IP address recovery
If the IP address is assigned by a DHCP server (default
setting), the DHCP server assigns the IP address again
directly after resetting.
Reset system
configuration
1. Disconnect the power supply (round plug or net-
work cable for PoE).
2. Wait 20 seconds.
3. Press and hold the reset button.
4. Reconnect the power supply (round plug or net-
work cable for PoE).
5. Release the reset button after one second.
9 Device flashes green again (see Signalling
[}45] ).
9 System configuration is reset.
RouterNode 2, GatewayNode 2,
SmartBridge
9. Reset
46 / 184 EN