EasyManua.ls Logo

Simons Voss Technologies RouterNode 2 - Reset; Signalling

Simons Voss Technologies RouterNode 2
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CAUTION
Network failure in critical situations
With the System 3060 and WaveNet you can imple-
ment emergency functions such as amok protection.
These emergency functions are critical.
1. Test locking systems in which critical emergency
functions are implemented at least once a month.
2. If necessary, also comply with other standards and
regulations according to which your system is oper-
ated.
8 Signalling
Signal Meaning
Green flashing (~1.5 Hz) Configured and ready to use.
Green flashing (~0.3Hz)
Not configured, but ready for oper-
ation
Red flashing (briefly) Restart
Green flickering Data transfer
9 Reset
If problems should occur or you want to reset the
device to its initial state, you can reset the device with
the reset button.
RouterNode 2, GatewayNode 2,
SmartBridge
8. Signalling
45 / 184EN

Table of Contents