Need help?Do you have a question about the SimonsVoss Digital Cylinder AX and is the answer not in the manual?
Warning about potential blocked access due to incorrect fitting or programming.
Warning about swallowing button cell batteries and resulting severe internal burns.
Warning that incorrect battery type can cause an explosion.
Caution regarding fire or burn hazard if batteries are handled incorrectly.
Instructions to prevent damage from electrostatic discharge.
Instructions to prevent damage from liquids.
Instructions for using suitable cleaning agents to prevent surface damage.
Instructions to avoid mechanical impacts that can damage components.
Warning about damage caused by reverse polarity of the power source.
Warning about interference from electromagnetic or magnetic sources.
Warning about metallic surfaces reducing wireless communication range.
Statement that products are designed exclusively for opening and closing doors.
Factors leading to malfunctions like poor contact or battery issues.
Installation and commissioning require specialized knowledge.
Company not liable for damage due to incorrect fitting or installation.
Warning about escape door function impairment with panic locks.
Issue with incorrect length preventing correct installation.
Thumb turn damage from hitting walls or objects.
Moisture can damage electronics; use WP version for outdoor use.
Risk of damaging cylinder with unsuitable tools.
Risk of locking in people without identification in freely-rotating cylinders.
Potential issue with reader knob clearance and radio signal reception.
Ensure the cylinder does not obstruct door opening/closing.
Notes on authorization security classes related to specific keypads.
Conditions for VdS approval for class BZ.
Details on fire resistance testing for specific door types.
Warning about escape door function impairment with anti-panic cylinders.
Caution regarding hand injuries from spring-loaded carriers.
Requirement for monthly checks of emergency exit lock components.
Description of the single-component mechanical knob.
Description of the multi-component electronic thumb-turn.
Details the components of a comfort cylinder.
Details the components of a freely-rotating cylinder.
Details the components of a half cylinder.
Describes the structure of Digital Cylinder AX for SO mortise locks.
Describes the structure of Digital Cylinder AX for RS mortise locks.
Overview of basic cylinder configurations like Comfort, Freely-rotating, and Half.
Describes Standard Euro, Swiss Round, Scandinavian Oval, and Round profiles.
Details versions like Anti-panic, Access Control, Waterproof, etc.
Explains the operation and potential range limitations of FD cylinders.
Describes the configuration of a half cylinder with one-sided actuator/thumb-turn.
Cylinder profile for Euro profile cylinders meeting DIN/EN standards.
Cylinder profile for Swiss Round cylinders.
Cylinder profile for Scandinavian Oval cylinders.
Cylinder profile for Scandinavian Round cylinders.
Details on anti-panic function for mortise locks with panic function.
Describes access event logging and time zone control features.
Cylinder supplied in brass colour with high-gloss thumb-turn covers.
Cylinder with additional seals for outdoor or high humidity use.
Cylinder with network cap integrating LockNode for networking.
Describes freely rotating cylinders with two LockNodes.
Cylinder with locking bit for multi-point locking systems.
Cylinder meeting VdS requirements for class BZ.
Tools for dismantling thumb-turns, removing covers, and assembly.
Overview of components like LockNode and replacement caps.
Description of the LockNode for networking capabilities.
How to replace caps on the electronic thumb-turn without reprogramming.
Details extension bolts, core extensions, and profile extensions.
Explains core protection adapters for increasing gaps.
Details inside thumb-turns and escape thumb-turns.
Explains how the first transponder activation is handled after initial programming.
Information on faster initial programming with specific devices.
Guide on programming using the SmartStick AX.
Advice on mounting to protect the inside from drilling.
Provides brief descriptions for installing different cylinder types.
Details on installing CO/AP cylinders.
Describes the tool-free initial assembly process for mechanical thumb-turns.
Instructions for fitting cylinders with clip-on covers.
Details on installing FD cylinders.
Instructions for fitting FD cylinders with clip-on covers.
Details on installing HZ cylinders.
Instructions for fitting HZ cylinders with clip-on covers.
Installation procedures for SO/RS cylinders in mortise locks.
Provides step-by-step instructions for various installation tasks.
Step-by-step guide to attaching the mechanical thumb-turn.
Step-by-step guide to removing the mechanical thumb-turn.
Step-by-step guide to attaching the electronic thumb-turn.
Step-by-step guide to removing the electronic thumb-turn.
How to perform a functional test after installation or battery change.
Specific functional tests for the anti-panic function.
Step-by-step guide on inserting the AX locking cylinder into the lock.
How to secure the AX locking cylinder using the face plate screw.
Information on using the LockNode for networking.
Step-by-step guide to remove the LockNode cap.
Step-by-step guide to install the LockNode into the battery compartment.
Step-by-step guide to attach the cap after LockNode installation.
How to replace caps on the electronic thumb-turn without reprogramming.
Step-by-step guide to remove a replacement cap.
Step-by-step guide to attach a replacement cap.
How to change the cylinder length using modular components.
Step-by-step instructions to extend the cylinder's length.
Step-by-step instructions to shorten the cylinder's length.
How to assemble a freely rotating cylinder from two comfort cylinders.
How to assemble a half cylinder from comfort or freely rotating cylinders.
Instructions for assembling the core extension.
Lists the included parts for the core extension.
Step-by-step guide to install the core extension.
Instructions for installing the escape knob.
Steps for installing the escape knob on an already fitted cylinder.
Steps for installing the escape knob on a removed cylinder.
Table explaining the meaning of different signal patterns (LED/buzzer).
Detailed steps for replacing the cylinder batteries.
Guidelines for cleaning and disinfecting the cylinder.
Technical details for Euro Profile and Swiss Round cylinders.
Technical details for Scandinavian Oval and Round cylinders.
Diagrams and measurements for different cylinder types.
Links to website for operation, configuration, and documents.
Links to website for declarations of conformity and certificates.
Instructions for proper disposal of the device and batteries.
Contact phone number for customer support.
Email address for customer support inquiries.
Link to the FAQ section for help and information.
General| Brand | SimonsVoss |
|---|---|
| Model | Digital Cylinder AX |
| Category | Locks |
| Language | English |
To Next Page