11/08/2019
|
1
Mailbox Shield
TM
Total Defense
419110
The Simplay3 Company
9450 Rosemont Drive
Streetsboro, OH 44241
| 1-866-855-0100
| www.simplay3.com
For assistance or replacement parts please contact Simplay3
®
Pour de l’assistance ou des pièces de rechange, veuillez communiquer avec Simplay3
MD
Para recibir asistencia o conseguir piezas de repuesto, póngase en contacto con Simplay3
®
RECOMMENDED TOOLS
ENGLISH
- Decal Application:
Clean and dry area thoroughly. Center decal in area. Apply pressure from center to
outer edge.
- To minimize risks posed by drill shavings, screws are designed to pierce the plastic
and form their own threads. Use caution not to over-tighten screws or they will not hold
parts together appropriately.
- Cleaning Instructions:
General cleaning: Use mild soapy water.
- Disposal Instructions:
Please recycle when possible. Disposal must be in compliance with all government
regulations.
- Required for Installation (choose one method from below):
- (1) Two T-post fence posts to match height of mailbox (not included)
- (2) Two Standard 4”x4” posts to match height of mailbox (not included)
- (3) Two Standard 2”x4” posts to match height of mailbox (not included)
- (4) One Standard 4”x4” post to match height of mailbox (not included)
- Wooden posts are recommended to be installed 18”-24” deep in the ground.
OBSERVE THE FOLLOWING STATEMENTS AND WARNINGS TO
REDUCE THE LIKELIHOOD OF SERIOUS OR FATAL INJURY.
SAVE THIS SHEET FOR FUTURE REFERENCE.
WARNING:
- Choking Hazard: Small parts. Sharp points. Adult assembly required.
C
D
x8
x8
E F
B
x8
3” (7,62cm)
PARTS LIST B
3/16”
56241911100
CHOOSE YOUR INSTALLATION METHOD
HEAVY DUTY APPLICATION
MEDIUM DUTY APPLICATION
4”X4” POSTS
STEEL T-POSTS
2”X4” POSTS
PARTS LIST A
A
x2
4”X4” POST
OPTION 1
OPTION 2
OPTION 3
OPTION 4
For Metal Posts
For Wood Posts
To Next Page
Need help?
General
