10
The time and date must be set manually for timed features to work
properly. Daylight Savings Time changes must also be applied manually.
This is only necessary when not connected, because the time and date
of the thermostat are set automatically over the Internet when connected
to Wi-Fi.
Press MENU to enter the menu system.
Press DOWN until >SET TIME is shown.
Press MODE to enter the Set Time menu.
The following settings are available:
HOUR nn
Set the hour of the time. If the 12 hour clock,
then the choices are 1-12.
MINUTE nn
Set the minute of the time, 00-59.
AM/PM AM
PM
This choice is only shown for a 12 hour clock.
Step 3: Set Time and Date
Use MENU to exit from the >SET TIME menu.
To Next Page
Loading...
