mount anchor plate connect wires
• Pull wires through hole.
• Level plate using provided lines.
• Screw plate over junction box or onto
wall.
• Attach ground/earth wire to the green
screw.
• Connect fixture wires — neutral to
white, live to black.
attach mirror
• Hook onto anchor plate.
• Use included allen wrench to secure
set screws at base.
• Press on/off power button located on
base.
Note: For maximum efficiency, always
leave mirror in “on” mode.
• Light automatically turns on as you
approach.
turn on
Note: Keep sensor window clean.
level
To Next Page
Loading...
