SimpleParenting DOONA - Adjusting the Rotation Angle of the Handle

19
7.2. Adjusting the rotation angle
of the handle
• Press the handle rotation buttons (#5) on
both sides simultaneously and begin rotating
the handle (#2) toward the desired position,
A, B, or C. Release the handle rotation
buttons (#5) and rotate the handle (#2) until
it is engaged in the desired position. You
should hear a “click” sound when the handle
is locked.
You can engage the handle (#2) in three different positions: A, B, or C.
•
NEVER place or hang accessories which are not
intended for use with the Doona Car Seat.
•
Remove all bags and accessories from the Doona Car
Seat before transitioning between modes.
• For storing the Doona Car Seat engage the
handle in position A.
• For a daily use of the Doona Car Seat, engage
the handle in positions B or C.
2
1
1
A
C
B
USE MODES