64
THE NEXT GENERATION CAR SEAT
Correct installation
•
Make sure the harness straps are not twisted and are correctly
routed through the shoulder strap slots.
•
Make sure that the shoulder straps are correctly reconnected to
the metal harness plate.
•
Make sure that the harness metal plate (#21) and shoulder
straps (#8) are routed between the metal bar (#22) and the
car seat body. No part should go infront of the metal bar (#22).
WARNING
STEP 3: Reconnect the 3 sunshade pins (#32) at the back of the
sunshade (#4).
To Next Page
Loading...
