3 S2084-0001-8 5/2006
Pluggable Firefighter Phones
Model Type Description UL ULC FM CSFM MEA (NYC)
2084-9014 4590-E Red pluggable phone
2084-9024 NA Push-to-talk red pluggable phone
For use with 2084-9001 or
2084-9023 Firefighter
Phone Jack Stations
Firefighter Phone Jack Station
Model Type Description UL ULC FM CSFM MEA (NYC)
2084-9001 4590-A Standard
2084-9023 NA With call-in LED
Remote phone jack station; single gang
mount, requires minimum of 2” box depth
Firefighter Phones Accessories
Model Description
2099-9804 Replacement break-rod
4081-9008 10 kΩ, 1/2 W, End-of-Line Resistor Harness; (ref. 733-894); one required for each Class B phone circuit
Firefighter Phone Backbox
Model Description
2975-9053
Backbox, red; dimensions = 13” H x 9-11/16” W x 3-1/2” D
(330 mm x 243 mm x 89 mm)
NOTE: Ordered
Separately; one required for
each Firefighter Phone Assembly listed below
Firefighter Phone Assemblies for Backbox Mounting (see note below)
Model
(Type)
UL FM CSFM
MEA
(NYC)
Locked
Door
Mounting
Style
Break-Rod
Door
Armored
Cable Phone
Push-To-
Talk Phone
Door Marking
2084-9002
(4590-B)
Surface
— — —
2084-9003
(4590-B)
Flush
— — —
2084-9004
(4590-BX)
—
—
Surface
—
—
2084-9005
(4590-BX)
—
—
Flush
—
—
2084-9006
(4590-C)
Surface
— —
2084-9007
(4590-C)
Flush
— —
2084-9008
(4590-CX)
—
—
Surface
—
2084-9009
(4590-CX)
—
—
Flush
—
LOCAL FIRE
EMERGENCY
PHONE
2084-9017
(4590-CX)
—
Surface
2084-9018
(4590-CX)
—
Flush
FIREMAN’S
TELEPHONE
EMERGENCY
OR
AUTHORIZED
USE ONLY
2084-9020
(4590-CX)
—
Flush
—
FIREMAN’S
TELEPHONE
FIREMAN’S USE
ONLY
2084-9021
(4590-CX)
Surface
2084-9022
(4590-CX)
Flush
Magnetic latch door with call-in red LED
on door trim and armored cable phone
FIRE WARDEN
STATION
NOTE: Includes phone, mounting plate, and door assembly; some models are agency listed by 4590 Series type number as shown
in parenthesis. These phone assemblies require a 2975-9053 backbox, ordered separately.
Firefighter Phone Backbox and Phone Assemblies for Backbox Mounting
Firefighter Pluggable Phones, Phone Jacks, and Accessories