Annunciator Overview,
Continued
Lamp Test
The Lamp Test function is performed automatically every time the Key Switch is
moved to the Lock position. The Graphical LCD Annunciator Lamp Test lasts 3-
seconds and includes all of the System LEDs, Progammable LE:Ds, Piezo, and a test-
pattern on the LCD display similar to the LCD display on the Master FACP.
Configuring Jobs with the
4100 Programming Unit
The programming unit contains two new card types for the Graphical LCD
Annunciator: one for the remote configuration and the other for the internal
configuration. The new card types are mapped into the existing LCD Annunciator
structure so they are internally identical. This method guarantees that the two
annunciators are programmed in an identical way. The programming technique of
the Graphical LCD Annunciator card is also identical to that of the conventional
4603-o 10 1 LCD Annunciator card.
Figure 13 shows the 4 100 Programming Unit’s Card Configuration Editor screen.
CRRD CONPIGURATlON EDITOR
-
2F
Signal auS why B audio Interface
Figure 13. 4100 Programming Unit Annunciator Selections
Continued on next pag;
22
To Next Page
Loading...
