Simplex 6310-9221A - User Manual

Standard Features
 Attractive, modern SlimLine design
 Hour/minute/second hands
 12” and 16” round models
 12” Square Models
 Individual automatic synchronization with
hourly correction
 Corrects Simplex 59 minute,
National Time/Rauland and various
58 minute correction formats
 Microprocessor-based movement
 Simple setup and installation
 Easily maintained and serviced
Optional Features
 Double-Dial Round Brackets
 Double-Dial Square Brackets
Description
Simplex Synchronous Clocks can be used in all types of
applications, from small offices to large-scale industrial
sites. Round clocks are available in 12”, and 16” sizes.
Square clocks are also available at 12”.
Each synchronous clock uses a sweep second hand, and
provides these capabilities:
Hourly correction. Clocks are automatically
synchronized with the Simplex Time Control Center
every hour. This means clocks will display the correct
system time after less than 59 minutes of power failure.
Clocks that are up to 59 minutes slow or 55 seconds fast
are corrected completely on the hour.
12-hour correction. Synchronization is provided for
clocks that are up to 12 hours slow. This ensures that even
the most prolonged power interruption in individual
clocks, or in the complete system, will be compensated
for automatically. Clocks that are up to 11 hours and 59
minutes slow are corrected every 12 hours.
Specifications
Case Material
ABS
Case Color
Black or Light Gray
Crystal
Shatter-proof, side-molded,
transparent polycarbonate
Voltage Input
85 – 130 VAC 50/60Hz
(110VAC); 7 – 28 VDC/VAC
50/60Hz (24VAC)
Average Current
Consumption
25 mA @ 110VAC
35 mA @ 24VDC/VAC
Hand Tolerance
Minute hand: +/- ¼ minute
Second hand: +/- ½ second
Temperature Range
32 F to 120 F (0 C to 40 C)
Compliance
95%, non-condensing
Wiring
Wiring size and type varies greatly, depending on
correction type, voltage used, quantity of clocks, cable
distance, local codes, and National Electrical Code Class I
requirements. Your local Sales Representative is equipped
to assist you with complete clock system design services
and wiring specifications.
Synchronized Time Products
Synchronous Clocks
6310/2310 Series A
S6310-9300-1 5/17
6310-9239A
2310-9271A
UL, cUL Listed

Simplex 6310-9221A Specifications

General

Operating Voltage	24 VDC
Power Supply	24 VDC
Mounting	Wall Mount
Display Type	LED
Synchronization	Master Clock
Type	Digital
Display	4-digit

Summary

Synchronized Time Products

Standard Features

Key features of Simplex synchronous clocks, including design, synchronization, and correction capabilities.

Optional Features

Additional mounting options for Simplex synchronous clocks, such as double-dial brackets.

Description

Overview of Simplex synchronous clocks' applications and automatic correction features, including hourly and 12-hour corrections.

Specifications

Technical details including case material, crystal, voltage, current, tolerance, temperature, and compliance.

Wiring

Guidance on wiring specifications and the need for local sales representative assistance for clock systems.

Mounting

Mounting Specifications

Table detailing PID, mounting type, dimensions, voltage, case color, dial face, and power connector for various clock models.

Clock Dimensions and Weight

Details on clock sizes, shipping weights, double/dual mount dimensions, and adjustable pole heights.

Mounting, continued

Service Replacement

Instructions for replacing existing Simplex 2310/6310 clocks with 2310A/6310A models using receptacle assemblies.

Semi-Flush Mounting

Information on mounting Simplex semi-flush clocks using specific back boxes and related dimensions.

Double-Dial Mounting

New System Installation

Steps for installing new Simplex synchronous wired clock systems using back boxes, Molex connectors, and hangers.

Non-Simplex Systems

Guidance on installing Simplex clocks in non-Simplex systems and information on automatic protocol detection.