7 S4100-0103 5/2013
4-1/2"
(114 mm)
Local Mode Controller dimensions, 6-3/8" (162 mm)
Box dimensions, 6-1/2" (165 mm)
4-5/8"
(117 mm)
1-3/4"
(44 mm)
Matching box is supplied with surface mount models
4601-9109 (red) and 4601-9111 (beige); for semi-flush models 4601-9108
(red) and 4601-9110 (beige), use a 1-1/2" (38 mm) minimum depth, 3-gang box
Fire Alarm Local Mode Controller
ENABLE
CONTROL
Alarm
Alarm
Silenced
Local
Mode
Active
Power
On
Alarm
Silence
Reset
Local
Mode
Control
See Operating Instruction 579-343
1" (25.4 mm)
into box
Local Mode Controller to Transponder Wiring:
1. Wire close-nippled to transponder, maximum distance = 20 ft (6.1 m).
2. Nine wires required: 24 VDC (2), one per LED indicator (4), and one per switch (3).
3. Wire size, 18 AWG (0.82 mm² ).
Slot 1 Slot 8Slot 7Slot 6Slot 5Slot 4Slot 3Slot 2
Expansion Bay Chassis
Block A
Block B
Block C
Block D
Block E
Block F
Block G
Block H
Size Definitions:
1 Block = 4” W x 5.65” H (102 mm x 144 mm); (often
called 4 x 5 modules)
1 Slot
= 2” W x 11.3” H (51 mm x 287 mm), typically a
motherboard with daughter card
Expansion Bay Module Loading Reference
Local Mode Controller Detail
To Next Page
Loading...