Simplicity 1021 User Manual

Simptidiig
Normal Care
1. Put a few drops of oil on:
A. Height Adjusters
B. Handle Pivots
C. Clutch Handle Pivots
(Self-propelled Models)
2. Wipe off any excess oil.
Figure 20. Lubricate Mower
1. Remove spark plug.
NOTE
Do not clean spark plug by sandblasting;
sand or grit that remains on plug may
damage engine.
2. Clean spark plug. If plug shows
signs of defects, it should be
replaced with a new plug.
3. Set gap at .030 inch.
4. Install spark plug in engine and
reconnect wire.
SPARK PLUG
WIRE BRUSH OR WASH
WITH COMMERCIAL
SOLVENT
Figure 21. Clean or Replace Spark Plug (Yearly Care)

Simplicity 1021 Specifications

General

Brand	Simplicity
Model	1021
Category	Lawn Mower
Language	English