Need help?Do you have a question about the Simplicity 1690393 and is the answer not in the manual?
General| Manufacturer | Simplicity |
|---|---|
| Model | 1690393 |
| Engine Displacement | 205 cc |
| Tilling Width | 16 inches |
| Forward Rotating Tines | Yes |
| Oil Capacity | 20 oz |
| Type | Rear Tine Tiller |
| Engine Type | Briggs & Stratton |
| Wheel Size | 13 inches |
Details on recommended accessories for the rotary tiller.
Broad safety guidelines applicable to all aspects of tiller operation and handling.
Steps and checks required before starting to operate the tiller.
Guidelines for safe use of the tiller during operation, including hazard awareness.
Safety considerations for maintaining and storing the tiller.
Step-by-step instructions on how to attach the tiller to the tractor.
Detailed steps for safely detaching the tiller from the tractor.
Identification and function of the tiller's primary control levers.
Essential checks to perform before starting the tiller.
Guidelines for safely moving the tiller between locations.
Safe practices for maneuvering the tiller when turning or backing.
Recommendations for optimal engine and gear settings for tilling.
Safety precautions and techniques for using the tiller on inclines.
Procedures for engaging and disengaging the tiller's operation.
Tips for effective tilling based on soil conditions and patterns.
Instructions for applying lubricant to the tiller at specified intervals.
How to adjust the tiller's chain for proper tension and function.
Procedures for storing the tiller during periods of non-use.
Guidelines for preparing and storing the tiller for extended downtime.
Addresses common problems like tines not rotating, shallow tilling, and poor tractor handling.
Steps to adjust the tiller's drive belt tension for optimal performance.
Procedures for adjusting the tension of the tiller's drive chain.
How to adjust the lift rod to control tilling depth and ground clearance.
Important safety and operational advice for those performing the setup.
Instructions for installing the PTO pulley and belt stop components.
Steps for installing various pulley parts onto the tractor.
Key physical measurements and approximate weight of the tiller.
Details on the tiller's control system and drive train components.
Information regarding the tiller's chassis construction and tine specifications.
To Next Page