Simplicity 1694847 - Page 18

Engine and Frame Group with Power Boost
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
Hook one end of spring (Ref. 7)
into top hole of roller arm (Ref. 6)
and other end into top hole of
the idler arm assembly in the
Traction Drive Group.
Long hub of idler
pulley (Ref. 3) to
be toward idler
arm (Ref. 6).
Position idler pulley (Ref. 12)
at center of slot in clutch arm
(Ref. 10).
Hook one end of spring (Ref. 14)
over clutch rod assembly (Ref. 10)
between tabs and other end into
slot in frame.
Torque (4) Engine
Bolts to 17 - 21 ft. lbs.
or 23 - 29 N m
Torque to
10-14 ft. lbs. or
14-20 N m
Right rear bolt.
Position belt stops 1/16 - 1/8
from belt when auger clutch is engaged.
1
9
15
16
17
18
22
21
26
28
29
30
1431
7
6
5
2
3
4
8
8
10
11
12
13
14
43
29
51
52
53
27
41
19
21
20
23
25
24
42
44
41
45
54
55
56
3546
3547
3548
35
36
38
40
39
37
45
50
49
1432
34
33
59
58
57
987038
The above parts group applies to the following Mfg. Nos.:
2005
18
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
1694847 - 10560E
1694848 - 10560EX
1694849 - 11570E
1694850 - E11570
1694851 - 1380E
1694852 - E1380
1694872 - 1390E
1694915 - 1390EX
TP 400-4250-00-LW-S