PART NO. DESCRIPTIONREF NO QTY.
Auger and Impeller Group
Footnotes
1 1679293 1 PULLEY, w/Hub
2 1928721 2 SCREW, Set Square Head Cup Point, 5/16-18 x 1/2 G8
3 1612187A 1 IMPELLER ASSEMBLY
4 1960474 1 SCREW, Set Square Head Cup Point, 3/8-16 x 1/2 G8
5 1612093 1 SEAL, Oil 1/4" Thick
6 1612149 2 BUSHING, 377/500 ID x 1-1/10 OD x 1-1/100 LG Powerdered Metal
7 1612127 1 COLLAR, Thrust 3/4 LG
8 2836098 1 PIN, Drive Lock Type A 3/16 x 1-1/2
9 1612129 1 SHAFT, Worm 18-1/10 LG
10 2818312 3 KEY, Woodruff, 47/250 x 5/8
11 1612111 1 TUBE, 9/10 OD 39/50 ID, 7-1/2 LG
12 1612142 1 GEAR, Worm 1-3/8 LG
13 2168111 1 WASHER, Thrust
14 2118118 2 SEAL, Oil, 1/4" Thick
15 1930642 8 NUT, Hex Flange, 1/4-20 Toplock Small (Uses Quantity of 6 on 28 adn 38 in. Models)
16 1612137 1 CASE, Gear R.H.
17 1612124 1 GASKET, Gear Case
18 2118315 2 WASHER, Thrust
19 1731916 1 SHAFT, 16 LG Auger 3 Holes
20 2830246 1 KEY, Woodruff 1/4 x 3/4
21 1612141 1 GEAR, Worm 7/8 LG
22 1612136 1 CASE, Gear L.H.
23 1923282 2 CAPSCREW, Hex Head, 1/4-20 x 2-1/2 G5 (Used on 32 and 38 in. Modles)
24 1960346 8 CAPSCREW, Hex Head, 1/4-20 x 2-1/4 G5 (Uses Quantity of 6 on 28 adn 38 in.
Models)
25 1668344 2 PIN, Flat Head Drilled
26 1918447 2 PIN, Cotter 47/50 x 3/4
27 1718782A 1 AUGER ASSEMBLY, L.H. 9-1/2 LG (Used on 24 in. Models)
27 1718784A 1 AUGER ASSEMBLY, L.H. 11-1/2 LG (Used on 28 in. Models)
27 1718786A 1 AUGER ASSEMBLY, L.H. 13-1/2 LG (Used on 32 in. Models)
27 1723945A 1 AUGER ASSEMBLY, L.H. 15-9/10 LG (without Burshing) (Used on 38 in. Models)
27 1731322A 1 AUGER ASSEMBLY, L.H. 15-9/10 LG (Includes Ref. No. 37) (Used on 38 in. Models)
28 1718783A 1 AUGER ASSEMBLY, R.H. 9-1/2 LG (Used on 24 in. Models)
28 1718785A 1 AUGER ASSEMBLY, R.H. 11-1/2 LG (Used on 28 in. Models)
28 1718787A 1 AUGER ASSEMBLY, R.H. 13-1/2 LG (Used on 32 in. Models)
28 1723944A 1 AUGER ASSEMBLY, R.H. 15-9/10 LG (without Bushing) (Used on 38 in. Models)
28 1721321A 1 AUGER ASSEMBLY, R.H. 15-9/10 LG (Includes Ref. No. 37) (Used on 38 in. Models)
29 2821133 2 FITTING, Lube 1/4 Drive, No Check Ball
30 1668971 1 FITTING, Pipe Plug, Square Head
31 1921962 2 CAPSCREW, Hex Head, 1/4-20 x 1-3/4 G5 (Used on 38 in. Models)
32 1723931 2 SHAFT, E-Coat, 5 LG (Used on 38 in. Models)
33 1920397 2 NUT, Hex Lock ESNA Light, 1/4-20NC-3B (Used on 38 in. Models)
34 1931277 2 NUT, Hex Flange, 5/16-18, Whiz Lock Small (Used on 32 and 38 in. Models)
35 1931333 2 CARRIAGE BOLT, 5/16-18 x 3/4 G5 (Used on 32 and 38 in. Models)
36 1723922A 1 SUPPORT, Gear Box 10GA (Used on 38 in. Models)
The above parts group applies to the following Mfg. Nos.:
2005
21
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
1694847 - 10560E
1694848 - 10560EX
1694849 - 11570E
1694850 - E11570
1694851 - 1380E
1694852 - E1380
1694867 - 9560E
1694872 - 1390E
1694914 - 9560EX
1694915 - 1390EX
TP 400-4250-00-LW-S
To Next Page
Loading...
