PART NO. DESCRIPTIONREF NO QTY.
Handles and Controls Group - Channel
Footnotes
1 1727128 1 HANDLE, Clutch R.H.
2 1668608 2 GRIP, Handle Clutch, Black
3 1928732 1 CAPSCREW, Hex Washer Head Taptite #10-24 x 1
4 1729104 5 BUSHING, 1/2 ID x 3/4 OD x 1/4, Plastic
5 1725205A 2 LEVER & TUBE ASSEMBLY, Clutch
6 1960471 4 CAPSCREW, Hex Washer Head Taptite #12-24 x 1
7 1705899 1 GUIDE, Control
8 1726317 2 GRIP, Black Soft 1 in. (24 in. & 28 in. Models Only)
9 1723965 2 HAND GRIP, Heated 1 in. (32 & 38 in. Models Only)
10 1667800C 1 DASHBOARD
11 1724489 1 PLUG, Button (38 in. Models Only)
12 1925592 6 CAPSCREW, Hex Washer Head Taptite 1/4-20 x 3/4
13 1930641 4 NUT, Hex Flange Whiz Lock 1/4-20
14 1935450 4 CAPSCREW, Hex Washer Head, 1/4-20 x 3/4 G5
15 1933689 1 CAPSCREW, Hex Flange Whiz Lock, 5/16-18 x 1-1/2
16 1678579 1 SPACER, 21/64 ID x 13/16 OD x 15/16
17 1705898 1 LATCH, Control
18 1701342 1 SPRING, Compression
19 1960686 1 NUT, Hex Flange 5/16-18 ESNA
20 1729855C 1 HANDLE ASSEMBLY, Channel
21 1723935A 1 BRACKET, Shift Control
22 1718791 1 CABLE & HANDLE ASSEMBLY, Clutch L.H.
23 1677453 1 ROD, Control 2 in. Flat
24 1727127 1 HANDLE, Clutch L.H.
25 1725702 1 SCREW, Pan Head Torx #10 x 1/2 Thick Cut
26 1664022 1 GROMMET, 1/2
27 2834683 1 CLIP, Wire
28 1933896 1 NUT, Hex Lock 10-24 with Nylon Insert NC3B (Quantity 3 used no 32 in. models)
29 1678392 1 SPACER, 17/64 ID x 3/8 OD x 21/64
30 1726728 1 CLIP, Clean Out Tool
31 1960589 1 SCREW, Phillips #10-24 x 3/4
32 7075909 1 TOOL, Clean Out
33 1726727A 1 BRACKET, Clean Out Tool
34 1960729 6 CAPSCREW, Hex Serrated Flange Tap, 5/16-18 x 1
35 1728115 1 CABLE ASSEMBLY, LH (Includes Ref. No. 36)
36 1707452 1 SPRING, Extension 3-11/32 Long
37 1960093 1 NUT, Push Pal (Used on all models Except 38 in. Models)
38 1714084 1 KNOB, Spinner, Soft (Used on all modles Except 38 in. Models)
39 1667588 4 BUSHING, 3/8 ID x 7/16 OD x 13/64, Nylon (Used on all models Except 38 in. Models)
40 1715658 1 ROD, Chute Control, 27 in. Long (Used on all models Except 38 in. Models)
41 1718793 1 SUPPORT, Gear (Used on all models Except 38 in. Models)
42 1718593 2 GEAR, Powered Metal (Used on all models Except 38 in. Models)
43 1918452 1 PIN, Cotter 1/8 x 1 (Used on all models Except 38 in. Models)
44 2816168 2 PIN, Spring 1/8 x 3/4 (Used on all models Except 38 in. Models)
The above parts group applies to the following Mfg. Nos.:
2005
5
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
1694847 - 10560E
1694848 - 10560EX
1694849 - 11570E
1694850 - E11570
1694851 - 1380E
1694852 - E1380
1694872 - 1390E
1694915 - 1390EX
TP 400-4250-00-LW-S
To Next Page
Loading...
