PART NO. DESCRIPTIONREF NO QTY.
Handles and Controls Group - Channel
Footnotes
45 1960518 2 NUT, Push for 1/4 Diameter Thread
46 1960252 2 CARRIAGE BOLT, 1/4-20 x 5/8 G5 (Used on all models Except 38 in. Models)
47 1960294 2 NUT, Hex Flange Whiz Lock, 1/4-20 Small (Used on all models Except 38 in. Models)
48 1725283 1 ROD, Chute Worm, 18 Long (Used on all models Except 38 in. Models)
49 1668186 1 WORM, Chute, L.H. (Used on all models Except 38 in. Models)
50 1611911 1 SUPPORT, Worm (Used on all models Except 38 in. Models)
51 1931333 1 CARRIAGE BOLT, 5/16-18 x 3/4 G5 (Used on all models Except 38 in. Models)
52 1960684 1 NUT, Hex KEPS Conical Washer, 5/16-18 (Used on all models Except 38 in. Models)
53 1723967 1 SWITCH, Hand Warmer (32 & 38 in. Models Only)
54 1923341 1 CAPSCREW, Hex Head, 1/4-20 x 3/4 G5 (32 & 38 in. Models Only)
55 1724037 1 RESISTOR BLOCK, Male Terminal (32 & 38 in. Models Only)
56 1960685 4 NUT, Hex KEPS, 1/4-20 Conical Washer
57 2172434 1 CLIP, Wire (Spout Rotator Models Only)
58 1725439 1 HARNESS, Wiring (Handwarmer Models Only)
58 1728968 1 HARNESS, Wiring (Handwarmer & Spout Rotator Models Only)
59 2825094 3 TIE, Self Locking 7-5/16 (32 & 38 in. Models Only)
60 1722460 1 PIN, Quick
61 1666255 1 ROD, Lower Shift 15-21/64 Long
62 1931317 2 CARRIAGE BOLT, 1/4-20 x 3/4 G5
63 1726304 1 ROD, Upper Shift 11-3/8 Long
64 1728114 1 CABLE ASSEMBLY, RH
65 1713844 1 KNOB, Hole
66 1714120 1 ROD & CLEVIS ASSEMBLY, Shift
67 1960705 1 CAPSCREW, Hex Flange Whiz Lock 1/4-20 x 2-1/4
68 1668681 1 WASHER, Curved
69 1668524 2 BLOCK, Pivot, Powdered Metal
70 1924361 1 WASHER, 1/2
71 1674567 1 ROD & ARM ASSEMBLY, Pivot
72 1960074 1 CLIP, Hair Pin
The above parts group applies to the following Mfg. Nos.:
2005
7
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
1694847 - 10560E
1694848 - 10560EX
1694849 - 11570E
1694850 - E11570
1694851 - 1380E
1694852 - E1380
1694872 - 1390E
1694915 - 1390EX
TP 400-4250-00-LW-S
To Next Page
Loading...
