PART NO. DESCRIPTIONREF NO QTY.
60" Mower Roller Bar Group -
Footnotes
ROCKER SHAFT ASSEMBLY 1 1715877ASM 1
CARRIAGE BOLT, 3/8-16 x 1-3/4 2 1931353SM 2
WASHER, 3/8 3 1960071SM 2
CARRIAGE BOLT, 3/8-16 x 1 4 1931350SM 6
LOCKWASHER, 3/8 5 1916965SM 10
NUT, Hex, Full, 3/8-16 6 1916950SM 12
WASHER, Plain, 3/8 7 1924940SM 4
BRACKET, Roller, RH 8 1716982ASM 1
SLIDE 9 1677507SM 2
WASHER, 1/2 x 1-1/4 10 1924361SM 2
BOLT, Shoulder 11 2172622SM 2
NUT, Adjuster, Eccentric 12 1704082SM 2
BAR ASSEMBLY, Roller, RH 13 1716341ASM 1
SET SCREW, Sqr Hd, 5/16-18 x 1/2 14 1928721SM 2
SHAFT, Roller 15 1719572SM 1
WASHER, 1.0 (Additional Qty As Required) 16 1960201SM 11
ROLLER, End 17 1678043SM 2
PIN, Cotter 18 1918459SM 1
ROLLER ASSEMBLY 19 1678043SM 7
BUSHING, Roller 20 1677762SM 14
SPACER, Long 21 1717011A 2
SPACER, Short 22 1701873SM 1
NUT, Hex, Nylon Lock, 3/8-16 23 1919439SM 1
BAR ASSEMBLY, Wheel 24 1716343ASM 1
WHEEL, Slide 25 1714760SM 1
WASHER, Flat, 1/2 x 7/8 26 1960027SM 1
E-RING, 1/2 27 2158399SM 1
HAIRPIN 28 1960074SM 1
HITCH PIN, 3/8 29 1729281SM 1
CAPSCREW, Hex Hd, 3/8-16 x 1-1/2 30 1921969SM 1
BAR ASSEMBLY, Roller, LH 31 1715882ASM 1
BRACKET, Roller, LH 32 1716983ASM 1
DECAL, Cutting Height Indicator 33 1717583SM 1
PLATE, Height Indicator 34 1716480ASM 1
CAPSCREW, Hex Hd, Taptite, 1/4-20 x 3/8 35 1929000SM 1
ROD, Indicator 36 1716481SM 1
CAPSCREW, Hex Hd, Taptite, 5/16-18 x 1/2 37 1924856SM 1
CARRIAGE BOLT, 3/8-16 x 2-1/4 38 1931355SM 2
SPACER 39 1676088A 2
STRAP 40 1676087ASM 2
The above parts group applies to the following Mfg. Nos.:
171
2009
Milwaukee, WI, USA. All rights reserved
© Copyright by Briggs & Stratton Corporation
1693445 - 60" Mower
TP 400-2215-B-LG-SMA
To Next Page
Loading...
