Need help?Do you have a question about the Simplicity Serge Pro SW432 and is the answer not in the manual?
General| Brand | Simplicity |
|---|---|
| Model | Serge Pro SW432 |
| Category | Sewing Machine |
| Language | English |
Details about stitch length settings.
Specifies the differential feed ratio.
Information on seam width adjustments.
Technical specification for needle bar stroke.
Information about the presser foot.
Details on how to lift the presser foot.
Type and size of needles used.
Specifies the number of threads supported.
Physical dimensions of the machine.
The net weight of the sewing machine.
Steps to open the extension table.
Steps to remove the free arm cover.
Information about the polarized plug.
Location and function of the light and power switch.
Instructions for using the foot control.
Chart for selecting needle, thread, and fabric types.
The correct order for threading threads.
Instructions related to the extension bar during threading.
Method for easy thread changing by tying.
Initial steps to begin sewing.
Explains markings on the presser foot for guidance.
How to finish a seam and chain off.
Procedures to follow when a thread breaks.
Guide to setting thread tensions for 4-thread overlock.
How to adjust the differential feed for fabric handling.
How to adjust the seam width.
How to perform 1-needle, 3-thread overlock sewing.
Guide to setting thread tensions for 3-thread overlock.
Steps to change the needle plate for hemming.
How to set machine controls for hemming.
Instructions for rolled overedge hemming using Method B.
Thread tension settings for rolled hemming Method B.
Steps to convert from 3-thread to 2-thread sewing.
Steps to convert from 2-thread to 3- or 4-thread sewing.
How to convert the machine to free arm sewing.
Steps to change the presser foot for blind hemming.
How to set machine controls for blind hemming.
Guidance on sewing blind hems.
Steps for sewing with the upper blade disengaged.
Machine control settings for a flatlock seam.
Thread tension adjustments for a flatlock seam.
Guidance on sewing a flatlock seam.
Guidance on sewing pin tucks.
Techniques for turning corners with overlock stitches, including inside and outside corners.
How to sew outside curves smoothly.
Instructions for cleaning the machine.
Guidance on oiling critical parts of the machine.
Steps to replace the sewing light bulb.
How to change the lower blade.
To Next Page
