Simplicity SunStar Series - User Manual

How to use this file...(Labels & Miscellaneous Documents)
————————————————————————————————————————————–––
Instructions for
Print Vendors (Paper Manuals)
Paper: * Various...
Press: * Various...
Bindery: * Various...
General: * This instruction page is NOT part of the document and must NOT be printed.
• Pages labeled with the text “THIS PAGE INTENTIONALLY BLANK” are placement pages ONLY,
and should NOT be printed.
• THIS document will most likely be a unique piece -- either a label or certificate or
other such miscellaneous format.
• EXACT specifications on the print & job specs should already be known to
you. In you are uncertain of what these specifications are, please contact
Simplicity Technical Publications.
• (Note: We will do our best to answer your questions concerning this job, but may need to transfer
you to another department within our company for additional specifications and job
requirements).
————————————————————————————————————————————–––
If you have further questions on how to utilize this file, please contact
Simplicity Technical Publications Department at (262) 284-8647.

Simplicity SunStar Series Specifications

General

Brand	Simplicity
Model	SunStar Series
Category	Tractor
Language	English

Summary

Commercial Front-Cut Riders with Dual Eaton Model 7 Hydrostatic

Wheel-Steer Neutral Adjustment

Adjusts the transmission control linkage to ensure wheels do not turn in neutral.

Spring-Centered Lever Adjustment

Transmission Speed Variation Adjustment

Forward Travel Stop Adjustment

Limits maximum output speed of each hydro pump for straight travel.

Reverse Travel Stop Adjustment

Controls maximum reverse speed by adjusting set collar position.

Large-Frame Tractors with Shaft Drive - Sundstrand Model 15 Hydrostatic

Large-Frame Tractors with Belt Driven - Sundstrand Model 15 Hydrostatic

Tractors with Tuff Torq K215-A & HydroGear (Sundstrand) Hydrostatic, BDU-21 L

Early Model Neutral Adjustment

Adjusts shift rod and ball retainer for neutral position on early models.

Late Model Neutral Adjustment (1686602 Kit)

Tractors with HydroGear 216-3010 L Hydrostatic Transaxle

Tractors with Eaton 850 Transaxle

Tractors with Tuff Torq K60 Hydrostatic Transaxle

Tractors with HydroGear 311-0750;311-0800 Transaxle

Lawn Tractors with HydroGear (Formerly Agri-Fab) Sundstrand BDU10 S Transaxle

Neutral Adjustment (Two Ball Joints)

Neutral Adjustment (One Ball Joint)

Lawn Tractors with HydroGear 310 - 0500 Transaxle (With Hand Control)

Return-to-Neutral Adjustment

Lawn Tractors with HydroGear 318-0500;322-0500;322-0650 Transaxle (With Foot Control)

Forward Speed Adjustment

Lawn Tractors with Eaton Model 7 Hydrostatic & Peerless 1300 Series Transaxle

Later Model Front-Cut Rider with Eaton Model 7 Hydrostatic

Early Model Front-Cut Rider with Eaton Model 7 Hydrostatic

Mid-Engine Riding Mowers with HydroGear 311-0500

Neutral Adjustment

Adjusts hydro control rod to prevent rider movement in neutral gate.

Return to Neutral Adjustment