33
TP 400-2157-00-AT-SMA
Turbo Mounting Group - 60” Legacy / 2000 / 2900 Series
1 1717618 1 COVER, L.H. Mower
2 1700669 1 PLASTIC KNOB
3 1700668 1 COVER ASSY., (Incl. Ref. Nos. 4 & 5)
4 1700649 1 HINGE
5 928707 2 RIVET, 3/16 x 5/16
6 1928919 2 NUT, Hex,Washer#10-32
7 1933988 1 PUSH NUT, 5/16 Stud
8 1935255 1 PALNUT, 5/16-18
9 1700654 1 BRACKET, Belt Cover
10 1916622 2 NUT, Hex, Full,1/4-20
11 1916964 2 LOCKWASHER,1/4
12 922121 2 SCREW, Rd. Hd., Mach., #10-32 x 3/8
13 1921958 2 CAPSCREW, Hex,1/4-20x 1/2
14 1679915 1 V-BELT
15 1922918 1 SCREW, Cap, Hex, 3/8-16 x 3-1/4
16 157424 1 WASHER, Special
17 1705897 2 BEARING
18 1700651 1 SPACER, Pulley
19 1700650 1 PULLEY
20 1700652 1 SPACER
21 1916965 3 LOCKWASHER, 3/8
22 1916950 3 NUT, Hex, Full, 3/8-16
23 1700852 1 SPRING, Torsion
24 1918447 2 PIN, Cotter, 3/32 x 3/4
25 1700832 1 HINGE ASSY., Rear
26 1921210 2 CAPSCREW, Hex, 3/8-16 x 1
27 1926110 2 CAPSCREW,Hex,7/16-14x2-1/4
28 1700801 1 PIVOT, Bracket, L.H.
29 1918199 2 LOCKWASHER, 7/16
30 1918213 2 NUT, Hex, Full, 7/16-14
31 1917372 7 NUT, Hex, Full, 5/16-18
32 1917356 7 LOCKWASHER, 5/16
33 1923325 2 CAPSCREW, Hex, 5/16-18 x 7/8
34 1700802 1 PIVOT, Bracket, R.H.
35 1700828 1 HINGE ASSY., Front
36 1700853 1 ROD, Pivot
37 1960318 1 CAPSCREW, Hex, 5/16-18 x 2-1/2
38 1925205 1 CAPSCREW, Hex, 5/16-18 x 5/8
39 1679898 1 CLAMP, Lower
40 1679899 1 CLAMP, Upper
41 1679163 1 NUT ASSY.
42 1923362 1 NUT, Hex, Full, Lock, 5/16-18
43 1677652 1 BRACE, Bracket Support
44 1931350 4 CARRIAGE BOLT, 3/8-16 x 1
45 1717580 1 BRACKET, Support
46 1921977 1 CAPSCREW, 5/16-18 x 1-1/4
47 1924940 1 WASHER, 3/8
48 1960486 1 SCREW, Socket Head, 5/16-18 x 1-1/4
REF NO. PART NO. QTY. DESCRIPTION
Footnotes:
The above parts group applies to the following Mfg. Nos.:
1692937, Turbo, 60”
To Next Page
Loading...